Acrylgel Pinkny 30g

BENEFITS: 

the dense acrylic gel allows smooth and precise application, does not run off or flood the cuticles, and the soft consistency moulds easily under the brush

PRO TIPS:

1. If you are working on transparent templates you can skip the step of creating the framework with the builder gel and immediately start building the first layer of nail with the chosen acrylic gel.
2. When applying the product avoid soaking the brush too much in the wipe off cleaner as this can make the product more fluid and can change its properties e.g. hardness, opacity, colour
3. You can use the acrylic gel to create 2D and 3D decorations - simply spread a small portion of the product onto the finished style and shape any decoration, e.g. a flower petal with a small brush (Aquarell Sting/ Cat Tongue 3d/ Pro Brush 2 or 4) and cure under a lamp.

APPLICATION TIPS:
Stencil extensions:

1. Wash and disinfect hands, then put on gloves.
2. Assess the condition of the client's hands and nails.
3. Clean the nail plate, remove cuticles with a nail pick or wooden stick.
4. Shorten nails as much as possible with a 180 grit file.
5. Roughen nails with a 100/180 grit file.
6. Remove dust from the nail with a soft brush. 
7. Degrease the nail with a cotton swab soaked in Cleaner 1.
8. Apply the appropriate primer (Acid Free Primer or Acid Primer).
9. Apply a thin layer of your chosen base coat to the natural nail plate and cure for 30 seconds under a MultiLed lamp.
10. Adjust and attach the stencil
11. Spread a small amount of Take Your Time or Primo Ultimo gel on the plate and stencil and create a skeleton in the desired shape of the free edge.  Create in the Multiled 30-60 seconds.
12. Remove the stencil carefully.
13. Apply a portion of the chosen acrylic gel to the plate and spread it with the brush also on the free edge. Keep in mind the correct build up and consider the creation of a proper top arch, apex and hairline while working. From time to time, moisten the brush in Wipe Off cleanser so that it does not stick to the paste. Cure in a multilamp, depending on thickness and colour chosen: 30-90 seconds.
14. Repeat if necessary, taking into account the correct structure of the nail extension and cure in the lamp.
15. Remove the inhibiting (sticky) layer with a cotton swab soaked in Wipe Off Cleaner.
16. Shape the nail to the desired shape and curves with a 180/240 grit file.
17. Apply your chosen colour of Gel Polish or gel top coat and cure in a multilight 30 seconds.
18. If the product requires it, remove the inhibiting layer with a cotton swab soaked in Shea Super Shine Cleaner.

Cure the natural plate:

1. Wash and disinfect hands, then put on gloves.
2. Assess the condition of the client's hands and nails.
3. Clean the nail plate, remove cuticles with a shovel or wooden stick.
4. Shorten nails as much as possible with a 180 grit file.
5. Roughen nails with a 100/180 grit file.
6. Remove dust from the nail with a soft brush. 
7. Degrease the nail with a cotton swab soaked in Cleaner 1.
8. Apply a suitable primer (Acid Free Primer or Acid Primer).
9. Apply a thin layer of Protein Base to the natural nail plate and cure for 30 seconds under a MultiLed lamp.
10. Apply a portion of your chosen acrylic gel to the plate and spread with a brush. Be sure to build up correctly and consider the creation of a proper top arch, apex and hairline. From time to time, moisten the brush in Wipe Off cleanser so that it doesn't stick to the paste. Cure in a Multiled lamp, depending on thickness and colour chosen: 30-90 seconds.
11. Remove the inhibiting (sticky) layer with a cotton swab soaked in Wipe Off cleaner.
12. Shape the nail to the desired shape and curve with a 180/240 grit file.
13. Apply your chosen colour of Gel Polish or gel top coat and cure in a multilight 30 seconds.
14. If the product requires it, remove the inhibiting layer with a cotton swab soaked in Shea Super Shine Cleaner.